Posted on 2015-08-20 by Author admin
A garage door is the one of the most basic security feature for most homes. With this in mind, you need to ensure that your garage door is installed properly. Though garage door installation is a job best left to the professionals, it is still possible to install your own garage door. In this article, we are going to cover some of the things you should have in mind when installing a garage door. Whether automatic or manual.
Ensure that you read all the instructions provided by the manufacturer.
Reading All the manufacturer's instructions gives you an overview of what is expected of you so that you can anticipate what comes next and what parts and tools will be needed. After reading the installation manual provided by manufacturers, you will be able to make an inventory of all the required parts and assemble the tools needed to complete the installation successfully.
Before installing a garage door, remember that your safety comes first. If you try to install a garage door haphazardly without sufficient preparation, then you may suffer physical injury.
Remember to release the tension.
Before you begin working on any garage door, you need to release the torsion spring tension. To do this, clamp adjustable locking pliers on to the spring shaft and wedge the pliers against the header wall above the door and insert a steel rod in to one of the springs holes in its winding cone. Use the steel rods to release the pressure. Releasing the tension on the torsion springs helps you avoid getting injured especially when replacing an old garage door.
Ensure that you measure the various areas where the door needs to be installed.
Remember to measure the various areas where you will be installed. Measuring will help you determine the door opening height-height from the top of the opening to the ceiling, door opening width, and the length of the garage door. Proper measurements will ensure that you install your garage door properly.
Remember to prepare the first panel of the door for installation before placing it in the door way.
To prepare the first panel for installation, attach the hinges if they are not already attached to the top of the panel, slide the roller into the right and the left hinges and attach the manufacturer strapped weather stripping on the first panel.
The last thing that you should have in mind is never try installing a garage door alone.
Never attempt a garage door installation by yourself. You need someone to help you with the lifting and fitting. A second person will also act as a backup in case things go wrong.
For garage door installation, garage door repair and maintenance in Atlanta, contact Atlanta home garage doors. Our team of highly skilled technicians will take care of all your garage door problems instantly. We offer high quality services and free garage door consultation at very affordable prices. For more information, contact us through our contact page.